Nokia Dbox2 bootet nicht mehr

Sammlung von Anleitungen und HowTos für dBox2
jesdatho
Neugieriger
Neugieriger
Beiträge: 3
Registriert: Mittwoch 24. Oktober 2007, 07:42

Nokia Dbox2 bootet nicht mehr

Beitrag von jesdatho »

Hallo. Ich habe das Problem das meine Dbox2 Nokia 2xI Avia 500 nicht mehr bootet. Sie bleibt einfach stehen wenn im Display "loading kernel" steht. Ich habe hier mal das bootlog angefügt.
Hoffentlich kann jemand helfen. Ich habe schon unzählige Images probiert.

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-65.4a.23.07.00.00-c3
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 149536
verify sig: 262
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Dec 7 2006 - 12:37:28)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ........... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 663919 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 663855 Bytes = 648.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.32-dbox2 (daniel@DBox) (gcc version 3.4.4) #7 Sa Sep 2 12:40:0
2 CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rw console=ttyS0
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30812k available (1128k kernel code, 368k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:19:32:ca
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x00800000 : "root (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cramfs: wrong magic
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.2.1 (2006.12.19-12:25+0000) multi-call event: $Id: eve
nt.c,v 1.12 2003/09/30 05:45:38 obi Exp $
kernel BUG at page_alloc.c:238!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C002A994 XER: 00000000 LR: C002A994 SP: C1DB3DC0 REGS: c1db3d10 TRAP: 1000
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1db2000[11] 'rcS' Last syscall: 6
last math 00000000 last altivec 00000000
GPR00: C002A994 C1DB3DC0 C1DB2000 00000020 00001032 00000001 FFFFCB23 C013FBEF
GPR08: 00000000 C0150000 00000002 C1DB3CC0 C0150000 10075940 00000000 00000000
GPR16: 10070000 00000009 00000000 10070000 000001D2 C0137C1C 00000000 00000000
GPR24: C0150000 00000000 C0137974 00001D62 00000000 00000001 C01379AC C01E0CF4
Call backtrace:
C002A994 C002ABF4 C001D6A8 C0009C34 C0002AA8 FFFFFFFF 1003F3EC
1003F560 10042740 100401B4 10040660 10040C4C 10003D00 10003D7C
0FEBD5AC 00000000

Please press Enter to activate this console. kernel BUG at page_alloc.c:261!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C002A7D0 XER: 00000000 LR: C002A7D0 SP: C1FF5DA0 REGS: c1ff5cf0 TRAP: 1000
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1ff4000[1] 'init' Last syscall: 2
last math 00000000 last altivec 00000000
GPR00: C002A7D0 C1FF5DA0 C1FF4000 00000020 00001032 00000001 FFFFCE65 C013FBEF
GPR08: 00000000 C0150000 00000002 C1FF5CA0 C0150000 10075940 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 000001D2 C0137C1C 00000000 00000000
GPR24: C0150000 00000000 C0137974 C0152090 00000000 00000000 C01379AC C01DF7FC
Call backtrace:
C002A7D0 C002ABF4 C001D6A8 C0009C34 C0002AA8 1001DA90 1001DEF0
1001E920 10003D00 10003D7C 0FEBD5AC 00000000
Kernel panic: Attempted to kill init!
<0>Rebooting in 180 seconds..

__________________
Bye jesdatho

Man sieht sich immer 2x.
Wuppertal
Interessierter
Interessierter
Beiträge: 66
Registriert: Samstag 25. August 2007, 21:13

Beitrag von Wuppertal »

Es liegt am Kernel. Lies die letzten Reihen. Bei meinem Computer wollte ich Linux starten, und da kam die gleiche Meldung.
Wuppertal
Interessierter
Interessierter
Beiträge: 66
Registriert: Samstag 25. August 2007, 21:13

Beitrag von Wuppertal »

Ist das Enigma oder Neutrino?
Tommy
Tuxboxer
Tuxboxer
Beiträge: 4332
Registriert: Dienstag 7. Mai 2002, 17:04

Beitrag von Tommy »

Flash einfach ein JTG

das
cramfs: wrong magic
sieht schon komisch aus
---------------------------
Alle weiteren Infos findest Du im WIKI
Bitte vor dem posten Boardregeln lesen und verstehen!
Wie erstelle ich ein Bootlog? Wo finde ich die FAQ?
jesdatho
Neugieriger
Neugieriger
Beiträge: 3
Registriert: Mittwoch 24. Oktober 2007, 07:42

Beitrag von jesdatho »

Tja was soll ich sagen. Mittlerweile habe ich soviel dran rumgeflasht das jetzt nicht mehr mal das funktioniert. Jetzt habe ich nur noch ein leeres Display was schwach leuchtet. Und das nur vom flashen. Muss wohl ein schlechtes Images gewesen sein. Sollte eigentlich eine BN 1.6 sein. Nun steh ich da. Schöne Scheisse.

Bye jesdatho
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Das ist ein JFFS2 Only Image. Soll er "daniel@DBox" fragen, was da los ist.

Edit:
Hat sich ja wohl erledigt *g*
There are 10 types of people in the world: those who know binary and those who don't
Tommy
Tuxboxer
Tuxboxer
Beiträge: 4332
Registriert: Dienstag 7. Mai 2002, 17:04

Beitrag von Tommy »

das ist alles nur kein :lol:
BN 1.6
---------------------------
Alle weiteren Infos findest Du im WIKI
Bitte vor dem posten Boardregeln lesen und verstehen!
Wie erstelle ich ein Bootlog? Wo finde ich die FAQ?
jesdatho
Neugieriger
Neugieriger
Beiträge: 3
Registriert: Mittwoch 24. Oktober 2007, 07:42

Beitrag von jesdatho »

Da hast Du recht. Das Log stammt von einem GLJ-Image. Ich habe aber weiter probiert und wollte eine BN rauf machen. Und dabei ist es dann wohl passiert.